Ricks Advanced Electric has been serving Apache Junction and the surrounding Pinal County area since 2009. We handle residential and commercial electrical work from quick repairs to full-scale installations, and we treat every job the same way: show up, do it right, and leave the property better than we found it. Same-day electrical service is available, so when something goes wrong, you are not waiting days for help. Our work travels by word of mouth here, so we earn it every time. Good workmanship. Good pricing. Good electricians.
From a single GFCI outlet to a whole-home rewire, we've seen it all, and we bring the same attention to detail whether the job takes an hour or a week. Electrical problems rarely announce themselves at a convenient time. Flickering lights, dead outlets, and tripping breakers are signals that something needs attention, and we diagnose the cause before we touch a wire.
Our everyday services cover a wide range:
We keep you informed from diagnosis to final test, so you always know what we found, what we did, and why. Call us and we'll walk you through the fix.
When the electrician arrives, the real work begins, and panel problems are some of the most important work we do. A breaker that keeps tripping is not just an inconvenience. It is a sign that a circuit is overloaded, a breaker has worn out, or the panel itself is reaching the end of its service life.
We handle the full range of panel and service work:
Older homes in the Apache Junction area sometimes still have aluminum wiring or knob-and-tube systems. Both present safety concerns and can limit your ability to add circuits or meet current code. We assess what is in place and replace what needs to go, bringing the system up to a safe, modern standard.
We stand behind every circuit we touch. Give us a ring and consider it handled.
For homeowners and property managers alike, we understand that electrical work needs to be done correctly the first time. A failed inspection or a wiring problem discovered during a sale can cost far more than the repair itself.
For homeowners, we handle renovation and remodel wiring, pre-purchase electrical inspections, and whole-home safety inspections. If you are adding a room, updating a kitchen, or finishing a garage, we plan the circuits and run the wiring to code. Whole-home surge protection is something we recommend alongside any larger project. The monsoon season in Arizona can send voltage spikes through your system that damage appliances and electronics, and a whole-home suppressor is a straightforward way to protect what you own.
For landlords, property managers, and local businesses, we cover commercial electrical repair, office and retail wiring, multi-unit and rental property electrical, and electrical rough-in for new construction. We understand that a vacant unit or a closed business costs money, so we work efficiently and communicate clearly. If a property has a code violation or needs a permit pulled for previous work, we handle that too.
A workmanship guarantee on every wiring job means you are not calling us back to fix the same problem twice. One ring and we're on it.
Apache Junction sits at the edge of the Superstition Mountains and faces some of the most demanding electrical conditions in the country. Intense summer heat runs air-conditioning systems hard for months at a stretch. Solar adoption across the East Valley is among the highest in the nation. EV ownership is growing fast as more residents commute into the Phoenix metro corridor. These three realities shape a lot of the electrical work we do here.
Older homes in this area were built before the loads of modern life. Add a central cooling system running at full capacity through a long Arizona summer, a solar array, and a home EV charger, and many original panels simply cannot keep up. We perform 200-amp service upgrades, subpanel additions, and full load calculations to make sure your system has the capacity to handle what you are asking of it. When a new cooling unit goes in, we handle the dedicated circuit and the disconnect on the electrical side, making sure the panel can carry the load safely.
We work on the electrical infrastructure that makes solar and battery systems function. That means service upgrades to support higher-capacity systems, interconnection wiring, dedicated circuits for battery storage, and transfer switches for battery backup setups. Apache Junction's sun exposure makes solar a practical choice for nearly every home, and the electrical work behind the panels and inverters is where we come in. We are the electrical contractor supporting your solar system, not a panel installer. If your solar contractor or battery provider needs a licensed electrician to handle the power side, that is our role.
A Level 2 home EV charger runs on a dedicated 240-volt circuit, and installing one correctly means checking panel capacity, running the circuit, and pulling the permit so the work passes inspection. We handle all of it. If your panel needs a small upgrade to accommodate the new circuit, we assess that upfront so there are no surprises. Apache Junction residents making the daily drive into Mesa, Gilbert, or beyond benefit from waking up to a full charge every morning. Call us and we'll walk you through the options.
We know schedules shift, so we keep booking flexible, and we make same-day electrical service available for situations that cannot wait. Whether you have a dead circuit, an outlet that stopped working, or a safety concern you want looked at today, call us and we will find a time that works.
Urgent and after-hours electrical repair is part of what we offer. Weekend availability means you are not forced to take time off work to get an electrician on-site. For power-outage preparedness, we also install backup generator hookups and transfer switches, so your home or business can stay operational when the grid goes down. If you are scheduling a service call for another reason, whole-home surge protection is a practical add-on that takes minimal time to install and pays for itself the first time a monsoon storm rolls through.
We discuss pricing before we start work. When you call for a quote, we ask the right questions so we can give you a realistic number over the phone or confirm it on-site before anything begins. There are no invoices that bear no resemblance to what was discussed. Work performed by licensed electricians should come with clear communication about cost, and that is how we operate. Request an estimate, get a straight answer, and decide from there.
We work throughout Apache Junction and the communities around it. If you are nearby, we can likely be there the same day. Our service area includes:
Pinal County is a large and growing area, and we have been part of it since 2009. If you are not sure whether we reach your address, call us and we will let you know right away.
For urgent situations, same-day service is available. When you call (520) 652-3289, we assess what is happening and prioritize accordingly. We are available every day from 7:00 AM to 8:30 PM, and we work to get an electrician on-site as fast as the schedule allows.
Breakers that trip frequently, a panel that feels warm to the touch, flickering lights throughout the house, and a burning or plastic smell near the panel are all signs that something needs attention. An older panel that has not been evaluated in years is worth having inspected, especially if you have added appliances or circuits since it was installed. Call us and we will assess the situation honestly.
Many homes in Pinal County were built when electrical loads were a fraction of what they are today. The original panels and circuits were sized for fewer appliances and no high-draw equipment like EV chargers or large air-conditioning systems. Adding circuits, upgrading the panel, or installing a subpanel are the right solutions when the existing system cannot keep up.
A Level 2 home EV charger requires a dedicated 240-volt circuit, a panel capacity check, and a permit pull so the work passes inspection. We assess your panel first, run the circuit, and install the charger wiring to support the vehicle you own. If the panel needs an upgrade before the charger can be added, we handle that as part of the same project.
We handle the electrical side of generator connections: the transfer switch, the dedicated circuit, and the connection to your panel. A properly wired transfer switch is what keeps a generator from back-feeding the grid and what makes it reliable during an outage. We do not sell generator units, but we wire the connection so yours works correctly when you need it.
Arizona's monsoon season brings lightning and power spikes that can damage appliances, electronics, and the wiring itself. A whole-home surge protector installed at the panel guards every circuit in the house, not just the outlets where individual strips are plugged in. It is a straightforward installation and one of the higher-value upgrades we offer for the cost.
Outlets that spark, lights that flicker without explanation, a burning smell from walls or fixtures, outlets that are warm to the touch, and two-prong ungrounded outlets throughout an older home are all signs worth investigating. Homes with aluminum wiring or knob-and-tube systems have additional concerns that go beyond cosmetic updates. Call us and we will take a look.
A pre-purchase inspection is one of the most common reasons people call us, since wiring problems discovered after closing can be expensive. Inspections also make sense before a renovation, after a storm, or when you have not had the system evaluated in several years. We cover arc-fault and ground-fault compliance, grounding, panel condition, and overall wiring safety.
A dedicated circuit serves a single appliance or piece of equipment and is sized specifically for that load. Dryers, electric ranges, refrigerators, dishwashers, EV chargers, and workshop equipment all typically require their own circuit. Running high-draw appliances on shared circuits is one of the most common causes of tripping breakers and overloaded panels.
Additional charges usually come from conditions that were not visible before the work started, such as wiring that needs to be replaced rather than repaired, permit requirements that were not anticipated, or access challenges inside walls or ceilings. We explain any change in scope before we proceed and give you a revised cost before doing additional work.
It depends on what caused the problem. A single damaged outlet that failed on its own is often a straightforward replacement. If the same outlet failed because of a broader wiring issue, a patch will not hold and the problem will return. We diagnose the root cause first so we can tell you honestly whether a targeted repair is appropriate or whether the right fix involves more of the circuit.
Ricks Advanced Electric is ready to take your call. Whether you need a quick repair, a panel upgrade, an EV charger wired, or a full electrical inspection, we are the local electricians who show up prepared and finish the job right. Call today. Wired tomorrow. Powered for good.
We handle the full range of residential and commercial electrical work across Apache Junction and the surrounding area. From a tripped breaker to a complete panel upgrade, every job gets a thorough diagnosis, clean workmanship, and a straight answer on cost before we start. The table below lays out what we do, who each service is built for, and a practical note to help you decide when to call.
| Type of Work | Scope of Work | Common Situations | Good to Know |
|---|---|---|---|
| Outlet & Switch Installation | new outlet and switch placementGFCI outlet installationUSB and specialty outletsdimmer switch wiring | Homeowners adding outlets, upgrading to GFCI protection, or replacing worn switches | Kitchen, bath, garage, and outdoor outlets in Arizona must meet current GFCI requirements. We bring everything up to code. |
| Ceiling Fan Installation | fan and light kit wiringswitch and remote setupbrace and box installationreplacement of existing fans | Homeowners adding or replacing ceiling fans in bedrooms, living rooms, or covered patios | Outdoor-rated fans on covered patios need a weatherproof box and proper circuit. We handle the wiring correctly the first time. |
| EV Charger Installation | Level 2 charger wiringdedicated 240V circuitpanel capacity checkmulti-brand vehicle compatibility | EV owners who need a home charger installed correctly and safely | Many homes need a panel capacity check before a Level 2 charger can be added. We assess first and install right. |
| Whole-Home Surge Protection | panel-level surge device installationprotection for all circuitsmonsoon and grid-spike defenseappliance and electronics protection | Any Arizona homeowner who wants to protect appliances and electronics from power spikes | Monsoon storms bring power surges that can damage everything plugged in. Panel-level protection covers every circuit in the house. |
| Wiring & Rewiring | whole-home rewiringaluminum wiring remediationroom addition wiringcode-compliant circuit updates | Older homes with outdated wiring or any property undergoing renovation or addition | Aluminum wiring is common in homes built in the 1960s and 70s. We assess the condition and lay out your options honestly. |
| Breaker & Fuse Repair | breaker replacementfuse panel evaluationtripped breaker diagnosisarc-fault breaker upgrades | Homes and businesses where breakers trip repeatedly or a breaker will not reset | A breaker that trips over and over is signaling a problem in the circuit, not just a nuisance. We find the cause. |
| Electrical Panel Upgrades | 100-amp to 200-amp service upgradesfull panel replacementsubpanel installationmeter and service-entrance upgrades | Homes with undersized panels, frequent breaker trips, or owners adding solar, an EV charger, or major appliances | Desert summers put a sustained draw on panels through continuous AC demand. An undersized service entrance compounds that load fast. |
| Outdoor & Misting-System Circuits | weatherproof outdoor outlet installationlandscape and patio lighting circuitsmisting system power hookupexterior GFCI protection | Homeowners adding outdoor living features, landscape lighting, or patio misting systems | Outdoor circuits in Arizona need weatherproof covers and proper GFCI protection given the heat, dust, and monsoon moisture. |
| Pool & Spa Wiring | pool pump and equipment circuitsspa and hot tub hookupGFCI protection near waterbonding and grounding compliance | Arizona homeowners adding or upgrading backyard pool and spa electrical | Wiring near water is subject to strict code requirements for bonding and GFCI protection. We do this work by the book. |
| Solar & Battery Installation | solar circuit wiringbattery storage hookuppanel upgrade for added capacitycode-compliant inspection-ready work | Homeowners whose solar quote includes an electrical scope they need handled separately | We work as the electrical contractor on solar projects, handling the power infrastructure side so it passes inspection. |
| RV Hookups | 30-amp and 50-amp RV outlet installationdedicated circuit for RV padweatherproof outlet and coverload check before installation | Homeowners who store or run an RV at their property and need a proper power connection | A 50-amp RV hookup requires its own dedicated circuit. We assess panel capacity and run the circuit correctly. |
| Dedicated Appliance Circuits | 240V circuit installationdryer and range circuitsworkshop and garage outletslarge refrigerator and appliance feeds | Homeowners adding a major appliance, workshop equipment, or any high-draw device | Running a dryer or range on a shared circuit is a code violation and a fire risk. A dedicated circuit is the right fix. |
| Lighting Installation | recessed and LED fixture installationunder-cabinet lightingsecurity and motion sensor lightscommercial LED retrofits | Homeowners updating interior lighting or businesses upgrading to energy-efficient fixtures | LED retrofits in commercial spaces often reduce energy costs noticeably and require no structural changes to the ceiling. |
| Electrical Repairs & Troubleshooting | flickering or dead circuitsburning smells near panelsGFCI and AFCI fault diagnosisgrounding and bonding corrections | Any homeowner or business owner with a wiring problem that needs a real diagnosis | Repeated faults without a root-cause fix can become a safety hazard. We trace the fault before touching a wire. |
How do I know if my home needs a panel or service upgrade?
Common signs include breakers that trip frequently, lights that dim when appliances kick on, a panel that feels warm to the touch, or a 100-amp service that predates your current electrical load. If you are adding an EV charger, a solar system, or a major appliance, we check panel capacity before we install anything. Call us and we will walk you through what we find.
Why does my breaker keep tripping?
A breaker that trips repeatedly is usually signaling one of three things: an overloaded circuit, a worn-out breaker, or a fault somewhere in the wiring. Resetting it without finding the cause is not a fix and can become a safety issue over time. We trace the problem to its source and correct it properly.
Is the electrical work permitted and inspected?
We pull permits where the scope of work requires them, which covers panel upgrades, new circuits, and most wiring projects. Permitted work is inspected by the local authority, which protects you when you sell the home and confirms the job was done to code. We handle the permit process so you do not have to.
Same-Day and Emergency Availability
Electrical problems do not keep business hours, and neither do we. Same-day service is available, and we work evenings and weekends to keep your home or business running safely.
What do flickering or dimming lights usually mean?
Flickering that happens when a large appliance starts up often points to a load issue on the circuit or an undersized service. Flickering that is random or constant can indicate a loose connection, a failing breaker, or a wiring problem that needs attention. Either way, it is worth having us take a look before it gets worse.
Is it safe to have aluminum wiring in an older home?
Aluminum wiring was common in homes built during the 1960s and 70s, and it is not automatically unsafe, but it does require specific connections and periodic inspection. Loose or corroded aluminum connections are a fire hazard. We assess the condition of the wiring and give you honest options, from targeted remediation to a full rewire depending on what we find.
What does EV charger installation involve?
A Level 2 home charger requires a dedicated 240V circuit run from your panel to the garage or parking area. Before we install anything, we check your panel capacity to make sure it can handle the added load. If an upgrade is needed, we handle that too. We work with all major vehicle brands and do the job once, correctly.
Work Performed by Licensed Electricians
Every job on this list is handled by licensed electricians who know local code and take the work seriously from the first call to the final walkthrough.
Do I need to be home when the electrician comes?
For most residential work, we prefer that an adult be present so we can walk through what we find and confirm the scope before we start. For commercial jobs or rental properties, we can coordinate with a property manager or on-site contact. Call us and we will work out the right arrangement for your situation.
How do estimates and pricing work?
We give you a clear estimate before we start, so you know what to expect on the invoice. If the scope changes once we are into the work, we stop and talk to you before moving forward. Pricing is straightforward and there are no surprises when the job is done. Call for a quote and we will tell you what we see.
Upfront Quotes With No Surprise Fees
We give you a clear estimate before we start. If the scope changes mid-job, we stop and talk to you first. The invoice reflects what we agreed on, nothing more.
Is same-day electrical service available?
Yes. Same-day appointments are available, and we keep booking flexible to accommodate urgent calls. When you call, we will give you a realistic arrival window based on our current schedule and your location. Urgent situations move to the front of the line.
Why do outlets or switches stop working?
A dead outlet is often a tripped GFCI somewhere upstream on the same circuit, a loose wire at the device itself, or a failed outlet that needs replacement. A switch that stops working can have the same loose-connection cause or a worn internal mechanism. We diagnose the actual cause rather than just swapping parts and hoping for the best.
Is whole-home surge protection worth it in Arizona?
For most Arizona homeowners, yes. Monsoon storms bring power spikes that can damage appliances, electronics, and HVAC equipment in seconds. A panel-level surge protector guards every circuit in the house rather than just the outlets where individual strips are plugged in. It is one of the more practical upgrades we install, and it goes in quickly.
Call (520) 652-3289 and we will talk through your situation, give you a straight answer on what it involves, and get you scheduled.
(520) 652-3289